So you need some help, no problem!
Primary is the unit of measurment most used by the client and consultants on a project
Secondary is an OPTIONAL backup unit where 2 units are required
Alignment set the way a tag is setup, left, center or right
Height should be calculated as required output size (we suggest 2mm) multiplied by the output scale, so at 1:200, size should be 400mm
All set? Click on Go!
MMoser warehouse
storage
Filing Cabinets
Pantry / Storage Cabinets
Worktops
![Base cabinet (eq/eq) - metric [mm]](storage/cabinet_base.png "Base cabinet (eq/eq) - metric [mm]")
![Base cabinet (eq/eq) - imperial [inches]](storage/cabinet_base_i.png "Base cabinet (eq/eq) - imperial [inches]")
![Base cabinet (fixed width) - metric [mm]](storage/cabinet_base_fixed.png "Base cabinet (fixed width) - metric [mm]")
![Base cabinet (fixed width) - imperial [inches]](storage/cabinet_base_fixed_i.png "Base cabinet (fixed width) - imperial [inches]")
![Wall cabinet (eq/eq) - metric [mm]](storage/cabinet_wall.png "Wall cabinet (eq/eq) - metric [mm]")
![Wall Cabinet (eq/eq) - imperial [inches]](storage/cabinet_wall_i.png "Wall Cabinet (eq/eq) - imperial [inches]")
